cross-posted from: https://lemmy.ca/post/14853380

[YSK] There is a Firefox extension that redirects Youtube videos to Peertube

I promise I'm not shilling for any of these companies.

I use the gluten free mix because of Celiac. We doubled the water and cheese and used it as batter in our stuffed waffle maker, filled with soft set scrambled eggs and more cheddar cheese. We used a heaping 1/2 cup of batter each for the top and bottom filling. The batter rises pretty quickly once it hits the cooking surface, so we'd press it back down as we were adding the fillings. It takes about 10 minutes to cook.

The mix comes with a herbed butter mix. After the waffle is cooked, we opened the maker, slathered each side of the waffle in the herbed butter, and closed it up again for about thirty seconds to let it cook in.

It's a perfect 5/7, highly recommended.

For the past two years, legitimate job postings on Indeed and Glassdoor have been replaced by scams. If you're tricked, the scammers aren't satisfied with your contact info in your CV, they reach out via email to request that you connect on an encrypted messenger app where they can privately scam you out of thousands in pre-hire "fees."

Applicants now have to add vetting job postings to their repertoire, which adds time and effort to an already stressful process. Things like researching the supposed company in need of labor, and digging into reports against them.

Protect yourself and assume any job posting is fake until proven otherwise. In the US, you should report any scams you became aware of.

Edit: add the following: @[email protected] recommends reaching out via phone or email to your nearest job service office, if you're seeking employment. These places are federally funded by our taxes, so they should be able to answer questions and help guide you to whatever your best options are, even if that includes helping you find remote work with out-of-state employers.

I've been working as an automation technician for around 5 years now, and I've come across several services that promise a substantial improvement in energy efficiency when it comes to heating, especially involving district heating with water. Most of these are subscription services.

While they usually quote numbers that are based in reality, the way they are accomplished is often covered in technical jargon and straight up BS that a person without experience won't be able to understand and so believes the seller.

That's where this post comes in.

All that the impressive sounding, weather pattern considering, ultra-futuristic solution really does is take the existing setpoint for the heating system and lowers it by ≈2°C. That's it. One line of code. Takes any competent professional 5 minutes to implement. What's worse, some systems are laid on top of the old one, with a higher priority. Meaning that you need a specialist provided by the "optimization" company to adjust the heating. So if you're too cold or too hot, tough shit. Your building's maintenance company can't change it.

The existing system in most cases already bases its setpoints on the current outside temperature, with a pollrate of around a second. What the weather is going to be like next week, or even tomorrow, does not matter. The system already adjusts the setpoints in real time.

Maybe a bit of a niche rant, but hopefully helps at least someone. Thanks for reading!

This is a pretty neat feature which is unknown for some reason. For example, in the Lemmy frontend, you can "speak as mod" which basically distinguishes your comment from others. It highlights it, pins it to the top of the comment section and also adds a red shield next to your username.

Try it by commenting in a post as mod, click on the three dots on your comment and click on the shield on the right.

What's this?

It's a RES-like browser extension that enables keyboard navigation, meaning you will no longer have to use your mouse to navigate Lemmy if want to use it for accessibility purposes or if you're lazy like myself 😌

Why YSK:

If you miss RES and have Chrome/Firefox/Opera/Edge (Safari still not supported) you can give it a spin and see if it makes your life easier.

Hope this is helpful and enjoy! 🚀

Sharing the basic hotkeys below, you may also find everything on the github page:

J = Next Post	/ Comment
K = Previous Post / Comment
L = Next Page	/ same-level Comment
H = Previous Page / same-level Comment
A = Upvote
Z = Downvote
X = Expand
C = View Comments
R = Reply
Enter = View Link

cross-posted from: https://lemmy.world/post/11099621

Apple today launched a new tool for iPhones to help reduce what a thief with your phone and passcode can access. The feature, called Stolen Device Protection, adds extra layers of protection to your iPhone when someone tries to access or change sensitive settings on your device.

cross-posted from: https://lemmy.world/post/11049489

The article provides a comprehensive overview of the risks associated with targeted ads and malvertising. It offers insights into the different ways malvertising can be carried out and how it can appear on any advertisement on any website, including popular ones. It cites examples of high-profile malvertising cases involving major companies and platforms. The article also highlights the dangers of malicious scripts that can be downloaded without user interaction and discusses the potential risks of scams and phishing.

The article provides clear and actionable advice on how to mitigate these risks, such as blocking ads and associated scripts, using adblocking software like uBlock Origin, and employing DNS resolvers capable of blocking malware and ads.

It also offers guidance on what to do when blocking ads is not possible, emphasizing the importance of avoiding clicking on displayed advertisements and being cautious of too-good-to-be-true offers.

Overall, the article is well-researched, informative, and provides a resource for understanding the risks of targeted ads and malvertising.

The app gives a score out of 100 for each product scanned based on how healthy or harmful it may be and offers alternative products which may be healthier. The developers do not sell ads or user data and have a no influence policy which prevents brands from paying to place their products in the app. There is a premium version which is sold on a sliding scale (pay what you want) and it offers the ability to search for products or save the data to search offline and a few other things but the free version is totally functional for checking products at home or at the store.

The article lists settings to change on Android 14 and iOS 17.

According to the author:

Recommended setting changes reduce the amount of data submitted to device manufacturers, cell carriers, or app developers and improve device security against common threats, such as those posed by nosy people who find the device unattended or by common malware.

By enabling all of these settings, you are significantly reducing the amount of tracking and data collection these devices perform, but keep in mind that you are not completely eliminating it.

Because if it ices over, your furnace will stop working on the day^1^ you most needed it.

Flushing it out from the outside with a bucket of hot water and a pump similar to this one ^2^ will melt the ice and open up the drain and you will get heat again.

^1^ Day because if your freezing weather lasts much longer than that, your homebuilder probably engineered a house that could handle the cold. Unfortunately my house was built by southern rednecks who'd never heard of insulation.

^2^ Not an endorsement of any brand or retailer. Just make sure it has a long enough hose. That's what made it work better than some of the things I tried first.

Are you a student navigating the intricate world of architectural studies, often finding yourself immersed in Revit assignments? If so, you probably understand the importance of timely submissions and the impact they can have on your academic success. One pressing question that may linger in your mind is, "Does Architecture Assignment Help, known as the best Revit assignment help online, deliver assignments on time?"

Well, let us put those uncertainties to rest! At Architecture Assignment Help, we take pride in our commitment to punctuality and understand the significance of meeting deadlines in the academic realm. Here's why you can trust us to deliver your Revit assignments promptly:

Dedicated Team of Experts: Our team comprises seasoned professionals with extensive experience in the field of architecture and Revit. They not only possess in-depth knowledge but are also well-versed in delivering high-quality assignments within stipulated timeframes.

Efficient Workflow: We have streamlined our processes to ensure efficiency at every stage of assignment completion. From understanding your requirements to conducting research, drafting, and final revisions, our workflow is designed to meet deadlines without compromising on quality.

Transparent Communication: We understand the anxiety that can accompany looming deadlines. That's why we prioritize transparent communication throughout the assignment process. You can stay updated on the progress of your Revit assignment and rest assured that it will be delivered on time.

Customized Solutions: Every assignment is unique, and we tailor our approach to meet the specific requirements of your Revit projects. This customization not only ensures high-quality work but also allows us to adhere to your timelines effectively.

Revision and Refund Policies: In the rare event that adjustments are needed, we offer a hassle-free revision process. Additionally, our refund policies are designed to protect your interests, reinforcing our commitment to delivering assignments on time.

So, if you've been pondering whether Architecture Assignment Help is the right choice for timely Revit assignment deliveries, the answer is a resounding "Yes!" We recognize the value of your time and academic success, and our dedication to on-time delivery reflects that commitment.

Ready to experience a seamless and timely assignment submission process? Visit our website today and take the first step toward stress-free Revit assignments. Your academic success is our priority at Architecture Assignment Help!

Available on Telegram - @multistorecourses or Email - [email protected].

Prisoner's dilemma is a problem commonly featured in game theory. Each player is given an option to be either nice or nasty. Each combination of player plays multiple number of rounds. When tested against different strategies, it is found that the best performing strategies are :

• nice first ( they don't start the provoking),
• retaliatory (when opponent is nasty they also resond nasty),
• forgiving (they don't hold grudges),
• clear (their strategies are clear for opponent to interpret) and
• generous (when the opponent has been nasty, they do not retaliate 10℅ of the time )

When a potato cooks, the starches contained in each cell are released as the cell walls break down. These starches absorb the potato's internal moisture and swell and soften. These two processes are what transform a raw, hard potato into a cooked, softer potato fit for mashing.

If you cut your potatoes up before boiling them, the starches absorb the internal potato moisture as well as the water in which they're being boiled. If they boil for too long, they absorb too much water and your mashed potatoes will become gummy. The difference between perfectly cooked potato pieces and soggy pieces can sometimes be as little as a minute or two.

An easy workaround is to boil potatoes whole. They'll take a bit longer to cook but you can leave them in the hot water after boiling without undesirable effects, keeping them warm until it's time to mash them. I start my potatoes boiling as soon as I begin cooking and mash them immediately before dinner.

If they need more moisture, you can add a bit of hot potato boiling water or another liquid. This way, you have more control of their moisture content.

It's refreshing to see a major news outlet discussing collateral damage and not just resistance. Over the past decade, 99% of the time antibiotic overuse is covered and warned about it's always only in regards to resistance.

It's a good article that also doesn't spread the common misinformation of "just take some probiotics and fermented foods after antibiotics and you're good to go".

Swallowing an antibiotic is like carpet-bombing the trillions of microorganisms that live in the gut, killing not just the bad but the good too, said Dr. Martin Blaser, author of the book “Missing Microbes” and director of the Center for Advanced Biotechnology and Medicine at Rutgers University.

“I think the health profession in general has systematically overestimated the value of antibiotics and underestimated the cost,” Dr. Blaser said.

No shit. And it has spread like a virus to the general populace as well. The majority of people seem mentally addicted to antibiotics and think they're going to die if they don't get an antibiotic for every minor issue.

• Find out if you really need an antibiotic.
• Ask for the shortest course.
• Rethink probiotics.

I appreciate the NYT for finally helping spread this.

Just yesterday people on Lemmy were cheering about AI discovering new antibiotics. When I shared info about the concerns of collateral damage, the responses were more unintelligent and close-minded than on reddit. Extremely depressing.

For more info on this subject there's a wiki and forum at https://humanmicrobiome.info.

Tldr; Wet newspaper dipped in ashes.

So, the other day I had to clean out the fireplace, and ofc the fireplace window(glass) was rather dirty. Tried for a while to get rid of it with paper, then scrubbing it off with a one-time-use sponge etc.. nothing gave any good results.

Then, I came across this random video online of a woman who said to use wet newspaper dipped in ashes from the stove, and start scrubing - This works like a charm! Forget all expensive chemicals and soaps to do this job, just KISS! Keep-it-simple-stupid.

Please give this a go next time you have to clean your wood-burning stove.

Due to the nature of fediverse, you can't just do a "site:lemmy" search as you'd do with reddit (site:reddit.com). I was searching for ways to do it on my firefox browsers and I came to a solution that searches 21 different instances simultaneously, which I consider to be a big part of lemmy (I also include kbin instances). I am using firefox with DDGO (which has a 500-character limit per search query).

There's gonna be a text you will have to copy, I'll just write it once here hidden inside the spoiler:

Replace it when I ask you to write the "URL string".

There are different processes, depending on the type of device/OS (computer, mobile/android etc.). I will list some of them and you can pick the one you want:

• Firefox Android: Go to search settings->manage alternative search engines->add search engine. Pick a name you want (eg. Lemmy) and on the search string URL paste the "URL string" I've written above. Now next time you want to search Lemmy, just select "Lemmy" as your search engine.

• Firefox Computer V1: Create a bookmark with a name you want (eg. Lemmy search). In the URL field paste the "URL string" I've written above. In the keyword field add a keyword to use as a prefix to your searches (eg. @l). Now to search Lemmy, you can type @l "random search" in the address bar.

• Firefox Computer V2: Open a new tab and type about:config in the address bar. In the search box type: browser.urlbar.update2.engineAliasRefresh Click on the little + symbol on the right. Go to firefox Settings->Search or enter this in the address bar: about:preferences#search In the "Search Shortcuts" section you should notice a new "Add" button. Just like on android, press "Add", insert a name (eg. Lemmy), add the "URL string" from above and once you're done you can add a keyword (eg. @lemmy). If you want, you can now go back and disable browser.urlbar.update2.engineAliasRefresh (press the trash can icon) (I don't know if this will crash anything).

I really wanted to search lemmy, but not being able to do a simple site:lemmy detered me from doing so.

So there you have it! The added text is 412 characters which leaves 88 characters for your searches. You can change the url to add/remove instances you want. If anyone can improve it please (like shrinking the url or if you manage to search all instances) it will be appreciated.

Credits:

• The idea came from this site (which I found on lemmy): https://fedi-search.com/ I asked it to search lemmy on ddgo and gave me a similar string to the one I have above, only limited to fewer instances.

• I found the biggest instances I wanted to include in the search using the csv from this github page: https://github.com/maltfield/awesome-lemmy-instances/blob/main/awesome-lemmy-instances.csv

• Lastly, I found the computer process from 2 answers on this stackoverflow question: https://superuser.com/questions/7327/how-to-add-a-custom-search-engine-to-firefox

When I search for something and open a Reddit post with recommendations, I might select some text (ex. the name of a recommended thing) and drag/drop them into the new tab area to look each one up.

Reddit blocks this when you are not logged in. I don't want to be logged in, especially when I'm on incognito or a firefox container since I'm shopping.

Here's the source of the fix: https://www.reddit.com/r/uBlockOrigin/comments/14h098f/reddit_desktop_embed_button/

Here is the specific UBlock Origin filter you can add (click the popup --> click the gears for Open the Dashboard --> My Filters tab)

www.reddit.com##+js(aeld, mousedown, isSelectionOutOfRange)
www.reddit.com##+js(aeld, mouseup, shouldShowButton)

"Systematic reviews of controlled clinical studies of treatments used by chiropractors have found no evidence that chiropractic manipulation is effective, with the possible exception of treatment for back pain.[8] A 2011 critical evaluation of 45 systematic reviews concluded that the data included in the study "fail[ed] to demonstrate convincingly that spinal manipulation is an effective intervention for any condition."[10] Spinal manipulation may be cost-effective for sub-acute or chronic low back pain, but the results for acute low back pain were insufficient.[11] No compelling evidence exists to indicate that maintenance chiropractic care adequately prevents symptoms or diseases.[12]"

Why YSK: Your signals alert other drivers as to what you're doing; a signal bulb costs a few bucks and is usually a quick and easy repair to do yourself (consult YouTube); and any place that regulates motor vehicles probably requires you to have working turn signals. So knowing when and how to replace a burned out signal bulb can save you an interaction with law enforcement.

Adding: You can diagnose which bulb is out by turning on your hazard lights and checking all four corners of your car. It'll be the one not flashing.

This is also probably a good time to check your brake lights. Put something heavy on the pedal or have a friend hold it down and check that all three brake lights illuminate. Replacing a burned out brake light is also usually pretty cheap, quick, and easy.

Today I got blind-sided by having Windows 11 pushed onto my workstation.

TL;DR: Microsoft is getting more pushy about Windows 11. I reverted an unwanted "upgrade", but I learned they remove the option to roll-back the install after 10 days.

I know many of us on Lemmy are IT professionals and probably running Linux already for use cases where it makes sense. If so, great. Good for you. So do I, mostly. Feel free to disregard this post. Unfortunately, I have a number of use cases that require me to keep my workstation on Windows (for now.)

Microsoft has been getting increasingly pushy and sneaky about the free (as in beer) Windows 11 upgrade. For me, this was reason enough to refuse to upgrade. In my experience with corporations, if they are pushing anything this hard, it is probably not in my best interests. In case you needed more reasons to decline the upgrade, I assure you there are plenty. I won't go into that too much here, but I hadn't planned on ever upgrading, and I despise Microsoft and Windows 11 even more now.

My lame story

About a year ago,IIRC, I set a registry key that purported to block the Windows 11 upgrade on my workstation. Or maybe I set the group policy. I forget which specifically it was as it's been an eventful year. Whatever it was I had done to block Windows 11, I either fucked it up or they stopped respecting it. Anyway, whatever happened, Microsoft kept nagging me over and over. I'd tell it "No, fuck off." But Microsoft won't take "No" for an answer. Eventually, I guess they just stopped asking and just installed it. I use this mostly via RDP, so it's possible I accidentally clicked something that triggered an upgrade? Not sure on that. I know I didn't choose to upgrade.

This morning, some stuff that normally runs on my workstation was not running correctly, which usually indicates that Microsoft has forced a reboot for updates again. I'm used to it, so I opened my macbook to remote into the workstation and get everything going again. Imagine my dismay when I discovered that my machine had been enshittified with Windows 11 against my will. Everything looked cartoonish and terrible. (Though it did seem to work for the 30 seconds I used it.)

I didn't panic, because even a lazy half-assed used-to-be-sysadmin like myself has set up backups and has a recovery drive handy. But that is still a pain in my ass, and I'd rather just get my machine back without the hassle.

After some quick searxing, I immediately found a guide to uninstall windows 11. Fortunately, Microsoft did make this part of the process relatively painless. Fuck Microsoft with a spiked buttplug for doing this in the first place, but at least I was able to get my installation back without having to resort to a manual system restore.

It is important to note here that the "go back to windows 10" option gets removed after 10 days. So if this happens to you, do not procrastinate like I usually do. Instead just go revert to Windows 10 immediately. After 10 days, they remove the windows.old directory and you'll have to do a clean install to get back to Windows 10.

Key Take-aways

• Microsoft is pushing Windows 11 hard.
• It was surprisingly easy to revert back to Windows 10. It took me about 5 minutes.
• I need to accelerate our migration away from relying on non-free software and services, especially Windows and Plex. Unfortunately, (at the risk of sounding like an IT middle-manager)... There is a long project backlog and the legacy tail is real.

HOW TO REVERT TO WINDOWS 10

aka roll-back or downgrade or windows 11 (courtesy of TomsHardware.com)

• Navigate to the Recovery submenu of Settings. The fastest way to get there is to search for "go back to Windows 10" and click the top result. You can also browser to Settings->System->Recovery.

• Click "Go back"

• Check off one or more reasons for your uninstall when prompted.

• Click "No, thanks" when asked to check for updates instead of rolling back.

• Click Next, Click Next, Click "Go back to Windows 10."

• Machine reboots, takes a couple of minutes, and then boots back into Windows 10.

If you're not married to Windows, I implore you to escape while you can.

(the link again in case the clickable title doesn't work on all instances: https://sketchtoy.com)

Have you ever tried to explain something over the internet that doesn't translate well into words (like a specific route on a map, the layout of a building etc.) and you also can't find a good picture on the internet showing what exactly you mean? Then just use that site to doodle a sketch. It is free of charge, doesn't require a registration/verification/whatever or extra software, and the sketches seem to stay online forever.

I have an online roleplaying group that relies solely on chat / texts and this site has helped me numerous times to demonstrate the layout of a tavern, camp or dungeon, to show what in-game items look like and/or how big they are, and to add easy-to-understand visuals to in-game puzzles that would otherwise be hard to describe verbally.

This drives me nuts when I see it done wrong, but it's actually kind of complicated because English is orthographically deranged.

Lead (/liːd/) [verb, present tense]: to guide, etc. I asked them to lead us in a rousing revolutionary anthem.

Led (/led/) [verb, past tense]: as above, but past tense. Later, we were led to a blank concrete wall.

Lead (/led/) [noun]: A soft, poisonous metal. Bullets are most often made of lead.

Just to make it confusing...

Lead (/liːd/) [noun]: kind of like "leader". Officer Johnson was our lead on this operation. (Note: it also means "leash"; e.g., I clipped the lead to Bowser's collar.)

Lede (/liːd/) [noun]: The first bit of a news story, often the first sentence. I didn't read the full article, but the lede suggested the protesters were decimated by police.

Leeds [proper noun]: A Town in England. Leeds is the worst place to stage peaceful protests.

And finally...

LED (ell ee dee) [noun, abbr.]: Abbreviation for light-emitting diode. For the love of any gods you might believe in, fucking capitalize it. Electronics hobbyists I'm looking in your direction.

More Examples

• Wrong: I was lead into the woods by a stranger.

• Right: I was led into the woods by a stranger.

• Wrong: The lead in an ad about cheap bulk led lead me to lede my leed dog to Leides on her led lede.

• Right: The lede in an ad about cheap bulk lead led me to lead my lead dog to Leeds on her LED lead.

(The last example is stupidly confusing, but it was fun to write.)