this post was submitted on 24 Nov 2023
1185 points (98.8% liked)

Memes

45132 readers
3258 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
1185
submitted 10 months ago* (last edited 10 months ago) by [email protected] to c/[email protected]
 
you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 6 points 10 months ago (3 children)

i mean its glass, could just melt it down

[–] [email protected] 16 points 10 months ago (1 children)

Sure, but the glass core is only 8–9 µm wide, it's a minuscule amount of glass compared to copper cables so it's not really worth it to melt it down.

[–] [email protected] 10 points 10 months ago* (last edited 10 months ago) (1 children)

Most optical fiber is 125um of glass with 250um coating. The coating and the jacketing that make up the cable (mostly non-recyclable plastic) are the real problem.

[–] [email protected] 1 points 9 months ago (1 children)

I don't know of any fiber that the core is 125 microns. Can you link to one? Neither Single Mode nor Multi Mode fiber is that large.

[–] [email protected] 1 points 9 months ago

Sure: https://www.prysmiangroup.com/sites/default/files/business_markets/markets/downloads/datasheets/SMF---Single-Mode-Optical-Fiber-SSMF.pdf

You are right the core of most optical fibers is either 8-9um for singlemode, or 62.5 or 50um for multimode. The cladding, which is also made of glass, surrounds the core and this is almost always 125um. Often there is more than one layer that makes up the cladding glass to help reduce the bend radius before you start to attenuate your signal. You need both the core and the cladding of different refractive indexes to create total internal reflection, which is how fiber optics work over long distances with low loss.

The glass (core + clad) is the only part of the fiber that is really recyclable. Everything else is plastic that is difficult to chemically remove.

There's a lot of really bad literature out there on fiberoptics, so I don't really blame anyone for not knowing this stuff. Here's a pretty good article that sums up how fiberoptics work I pulled off google: https://www.ofsoptics.com/faq-guide-to-fiber-optic-cable/how-do-communications-fiber-optic-cables-work/

[–] [email protected] 3 points 10 months ago (1 children)

What makes fiber optic useful is the fact that it is a very specific kind of glass.

[–] [email protected] 3 points 10 months ago

But it's still dirt fucking cheap to produce.

The expensive parts of fibre are the transmitters/receivers at each end and the labour to splice/terminate it properly.

[–] [email protected] 2 points 10 months ago (1 children)
[–] [email protected] 5 points 10 months ago

Some are complex, most aren't I'd say.