sugar_in_your_tea

joined 1 year ago
[–] [email protected] 0 points 1 month ago

No, but that's not AMD's fault.

[–] [email protected] 1 points 1 month ago

Have you tried giving it red rum?

Oh, and make sure you hold it out with the insides of your arms exposed, it'll feel less threatening that way.

[–] [email protected] 1 points 1 month ago

Yup, I'm adding locations that don't exist in OSM. Honestly, the app is fantastic as-is, but maybe I'll look into their bug tracker and see what I can do.

[–] [email protected] 2 points 1 month ago (1 children)

Better yet, look up YouTube videos on how to remove the tracking bits. Sometimes it's pretty easy, like just unplugging a connector or two (e.g. disabling OnStar is usually that easy). Do that research before buying, then remove it once you buy.

[–] [email protected] 2 points 1 month ago* (last edited 1 month ago) (1 children)

Well, here's what I found:

The mfg website had other networking and NAS-type stuff, so I guess they're an OEM in China.

The OMV page says it idles at ~23W, which seems odd since that CPU has a 6W TDP and other boards with the same CPU seem to idle around 6W. It seems something to do with how they're using PCIe to provide the I/O is taking up a lot of power?

[–] [email protected] 1 points 1 month ago

Ah, that's too bad. Ambient in his office is probably way different than his bedroom, so that's pretty lame.

[–] [email protected] 2 points 1 month ago (3 children)

Wow, that's like... exactly what I was looking for. It's also from a brand I don't recognize and reviews say there's no manual (I ignore those anyway), but if it works it works. And 4 2.5G ethernet? What an odd board!!

Thanks! I'll definitely be looking to see if I can find out anything more about this board!

[–] [email protected] 5 points 1 month ago

Counter-proposal: no.

[–] [email protected] 1 points 1 month ago* (last edited 1 month ago) (1 children)

As long as it has the ports, I can look into options for cases. I only need 2x 3.5" drives for now, the other two are just for upgrade options (e.g. buy two bigger drives, copy from existing array to new array, remove old drives, etc).

I'll have to check those out.

[–] [email protected] 1 points 1 month ago* (last edited 1 month ago)

I'm honestly not sure, I'm just pulling stuff from various online sources to get an estimate. This YouTube video measures noise from a single 7200 RPM WD Red drive, and I have 2x 5400 WD Red drives, so I'm guessing mine will be similar, if not a little quieter. I'd measure it myself, but it's next to 2 other PCs and fan noise drowns it out.

Basically, I want it to work under my bed. It's a large, thick bed (king size purple mattress; so basically foam), so I can stick it pretty far in to get some flexibility on what "quiet" means. We also aren't particularly light sleepers, so our threshold is probably a little higher than others.

That said, I'm using the stock fan for my Ryzen 1700 (Wraith Spire I think?), and that's way too loud for a bedroom (40dba-ish?), and I can't really hear my drives over the fan unless I get really close. The spec on the drives say something like 20-30dba for my drives (I'm guessing that's right next to the drive), and I think that's quiet enough for my room, especially if I can dampen vibration a bit. But since the drives will probably spin down, I'm looking for fan noise around that level or lower, if I need a fan at all.

[–] [email protected] 1 points 1 month ago

That's not bad.

My current setup isn't that power hungry (like 50W idle w/ GTX 750 ti installed, no GUI; measured at the wall), but I was hoping for something like 10W for everything except the drives. I'm guessing my current CPU + GPU is about 30-35W and is totally overkill.

I've looked at NUCs and miniPCs, and the main issue is the lack of PCIe/SATA. The best option seems to be to get a separate USB-C enclosure, but those seem kind of sketchy. That's why the ZimaBlade looked interesting, but I'm worried it's a little underpowered. I'd really like the ZimaBlade w/ an N100, another drive port (SATA, eMMC, m.2), and real USB-C. If I could get that for <$200, I'd get it.

[–] [email protected] 0 points 1 month ago* (last edited 1 month ago) (2 children)

Really? I currently sit like 3' from my current PC NAS, and while I can hear it, the fan noise seems louder (stock AMD heatsink and fan). This YouTube looks at very similar drives to what I have (my drives are WD 8TB NAS Plus 5400RPM, video is 8TB NAS Pro 7200), and the measurement is something like 10-15DB per drive. Mine should be quieter than the video, so I think it'll be fine.

I'll probably need to replace my drives soon since I got them 5 years ago (though they were off 80% of the time), so I may consider SSDs if the pricing looks reasonable (I'm only using 2-4TB right now, but I expect that to double or triple in the next couple years).

Anyway, this is a somewhat temporary situation. Quiet gives me options. If it's too loud, I can keep it on my desktop. I'm more looking for lower power (currently use 50W-ish idle for whole system) and smaller form factor (current one is a massive ATX tower).

 

Here's what I currently have:

  • Ryzen 1700 w/ 16GB RAM
  • GTX 750 ti
  • 1x SATA SSD - 120GB, currently use <50GB
  • 2x 8TB SATA HDD
  • runs openSUSE Leap, considering switch to microOS

And main services I run (total disk usage for OS+services - data is :

  • NextCloud - possibly switch to ownCloud infinite scale
  • Jellyfin - transcoding is nice to have, but not required
  • samba
  • various small services (Unifi Controller, vaultwarden, etc)

And services I plan to run:

  • CI/CD for Rust projects - infrequent builds
  • HomeAssistant
  • maybe speech to text? I'm looking to build an Alexa replacement
  • Minecraft server - small scale, only like 2-3 players, very few mods

HW wishlist:

  • 16GB RAM - 8GB may be a little low longer term
  • 4x SATA - may add 2 more HDDs
  • m.2 - replace my SATA SSD; ideally 2x for RAID, but I can do backups; performance isn't the concern here (1x sata + PCIe would work)
  • dual NIC - not required, but would simplify router config for private network; could use USB to Eth dongle, this is just for security cameras and whatnot
  • very small - mini-ITX at the largest; I want to shove this under my bed
  • very quiet
  • very low power - my Ryzen 1700 is overkill, this is mostly for the "quiet" req, but also paying less is nice

I've heard good things about N100 devices, but I haven't seen anything w/ 4x SATA or an accessible PCIe for a SATA adapter.

The closest I've seen is a ZimaBlade, but I'm worried about:

  • performance, especially as a CI server
  • power supply - why couldn't they just do regular USB-C?
  • access to extra USB ports - its hidden in the case

I don't need x86 for anything, ARM would be fine, but I'm having trouble finding anything with >8GB RAM and SATA/PCIe options are a bit... limited.

Anyway, thoughts?

0
submitted 4 months ago* (last edited 4 months ago) by [email protected] to c/[email protected]
 

Horse styles of the ’50s

0
submitted 4 months ago* (last edited 4 months ago) by [email protected] to c/[email protected]
 

For crying out loud, Jonah! Three days late, covered with slime, and smelling like fish! … And what story have I got to swallow this time?

1
submitted 4 months ago* (last edited 4 months ago) by [email protected] to c/[email protected]
 

You know what I’m sayin’? … Me, for example. I couldn’t work in some stuffy little office. … The outdoors just calls to me.

2
submitted 4 months ago* (last edited 4 months ago) by [email protected] to c/[email protected]
 

Look! Look, gentlemen! Purple mountains! Spacious skies! Fruited plains! … Is someone writing this down?

2
submitted 4 months ago* (last edited 4 months ago) by [email protected] to c/[email protected]
 

Sure, I’m a creature—and I can accept that … but lately it seems I’ve been turning into a miserable creature.

1
submitted 6 months ago* (last edited 6 months ago) by [email protected] to c/[email protected]
 

I'm going to be overhauling my network over the next few months as I get ready for my new municipal fiber installation. I have a general idea of how to set things up, but I'm not an expert and would appreciate a few extra pairs of eyes in case I'm missing something obvious.

Hardware available:

  • Microtik Routerboard - 5 ports
  • Ubiquiti AP - AC-Lite; plan to add U6+ or U6 Lite once I get faster service
  • some dumb switches

Devices (by logical category; VLANs?):

  • main - computers and phones (Wi-Fi for now, I plan to run cable)
  • media - TVs, gaming consoles, etc
  • DMZ - wired security cameras, Wi-Fi printer (2.4GHz wireless g only)
  • guest - guests, kids computers

Goals:

  • main - outgoing traffic goes through a VPN
  • media - outgoing traffic limited to certain trusted sites; probably no VPN
  • untrusted - cannot access internet, can be accessed from main
  • guest - can only access internet, potentially through a separate VPN from main

Special devices:

  • NAS (Linux box) - can access main, media, and DMZ
  • printer - accessible from main, rest of devices on untrusted don't need to be (I can tunnel through the NAS if needed); can potentially configure a CUPS server on the NAS to route print jobs if needed

Plan:

Router ports:

  1. Internet
  2. WiFi APs
  3. main VLAN
  4. untrusted (VLAN)
  5. unused (or maybe media VLAN)

WiFi SSIDs (currently have a 2.4Ghz and 5Ghz SSIDs):

  1. main VLAN
  2. guest VLAN
  3. untrusted - hidden SSID (mostly for printer) - 2.4GHz only

If the VPN causes issues, I would like the ability to move individual MACs to another VLAN (say, to media, or a separate, usually unused backup VLAN). Not required, just a backup plan in case the VPN causes issues.

This is my first time configuring VLANs, so I'm not really sure what my options are. Also, I'm not super familiar with Mikrotik routers (I'm not a sysadmin or anything, just a hobbyist), I just got fed up with crappy consumer hardware and wanted something a bit more reliable.

Does that sound like a reasonable plan? Is there something I could improve or suggestions you have?

Edit: DMZ is the wrong term, so I replaced it with "untrusted". By that I meant a local-only network, so no Internet access. Ideally I could access these devices from my main network, but they can't initiate connections outside their VLAN. However, that's not necessary, since I can tunnel through my NAS if needed.

 

I have tried a ton of RPGs, and most just don't click for me. Here are a few:

  • Skyrim - enjoyed Morrowind for the side content, Skyrim just felt empty
  • Chrono Trigger - enjoyed until about halfway through with the battle with Magus; felt very RNG dependent, or maybe I was under leveled; I bailed after 5 or so attempts that all ended the same way (healer got killed and everyone got picked off)
  • Pillars of Eternity - burned out somewhere in Act 2 (20-25 hours); combat system annoyed me, and I dislike picking new abilities
  • Banner Saga - story is great, but I hate the combat, so I bailed

Some things about me:

  • I don't care about leveling up/character builds, it feels like a chore; abilities also don't interest me
  • I hate grinding
  • using items feels like cheating, so I tend to just use character abilities (I will heal if needed); I'd rather "git gud" than buy and use items
  • turn based combat (tactics) is generally boring, but I do like puzzles, so that can make it acceptable
  • I don't like the feeling of being OP, I want to struggle through the end
  • I don't like loot

That said, here are a few that I've really enjoyed:

  • ARPGs like Ys and Zelda - items are rare or are tools in a puzzle-like system; favorites are Ys 1, Ys Origin, Zelda: A Link to the Past, and Zelda: Skyward Sword (probably because I played Skyward Sword recently); I dislike BotW, and Memories of Celceta has been dragging a bit (I'm near the end, but excited to finish)
  • interesting RPGs like Undertale - short and very unique experience
  • Souls-like games - challenge involving melee/dodging keeps me going
  • Legend of Heroes: Trails in the Sky - not a fan of the combat, but the story is interesting somewhat at least; I'm about 2/3 through I think (30 hours), but I've taken a multi-month break; likewise, Xenoblade Chronicles is interesting so far, but I'm not super excited about it (may bump down to story mode to get through it, the combat sucks imo)
  • Nier: Replicant - great story, leveling stayed out of the way, and I never felt like I needed to grind or upgrade gear

I really like the storylines of RPGs, I just don't like actually playing them. Unfortunately, my preferred ARPG genre is filled with loot nonsense, and I've played most of the ones that don't really on that as a mechanic. Perhaps my favorite RPG-adjacent game not mentioned already is Yakuza 0, I'm not a fan of the combat, but he story is amazing and the side content is fun.

Does anyone feel similarly? Do you have any suggestions for other games to try?

30
submitted 11 months ago* (last edited 11 months ago) by [email protected] to c/[email protected]
 

In Costume Quest, you play as one of two fraternal twins who go out to trick-or-treat, but then your sibling gets kidnapped by monsters and you go on a quest to rescue them. Along the way, you collect new costumes (which give you new abilities), get friends to join you on your quest, and collect power ups.

In Costume Quest 2, you are transported to a world where Halloween has been outlawed, and you work to fix it. Gameplay is similar to the first where you collect costumes and power ups and fight monsters to catch the person responsible for outlawing Halloween.

Gameplay is pretty basic. The core gameplay loop is:

  1. Knock on a door
  2. If a human answers it, you get candy and repeat from 1
  3. If a monster answers, you get into a turn based fight like a simplified Final Fantasy battle; repeat from 1

The battle mechanics are simple enough my young kids (were 5&8 at the time) could handle it with some help on strategy. The strategy gets more relevant later in the game (certain attacks do better on different kinds of monsters), but it's simple throughout.

Both are fantastic, casual, Halloween-themed RPGs suitable for kids, and I really enjoyed playing both with my kids tag-teaming with me. You can get both for $5 total right now.

The reason I bring it up is because my kids asked me to play them again with them, and I was trying to find something similar and came up empty (I don't like replaying games).

Does anyone have any recommendations for games with a similar appeal? The mix of costumes with power ups and simple combat was the main draw for us, but I'm open to looking at anything with a Holloween theme that is suitable for younger kids, bonus points for couch co-op style of gameplay. The closest are probably LEGO games (which are great), but my kids seem a little tired of the formula.

 

There's another community already for patient gamers here: [email protected].

Consider consolidating to just one community to not split our relatively small group.

I've joined both, but will probably be more active at the other.

view more: next ›