RetroGaming

18864 readers

257 users here now

Vintage gaming community.

Rules:

Be kind.
No spam or soliciting for money.
No racism or other bigotry allowed.
Obviously nothing illegal.

If you see these please report them.

founded 1 year ago

MODERATORS

[email protected]

Advice on increasing dpad sensitivity? (lemmy.world)

submitted 3 months ago by [email protected] to c/[email protected]

4 comments fedilink hide all child comments

Hello all! I have an amazing modded GBA that I purchased through an eBay builder who was wonderfully communicative and built my console exactly how I wanted it.

Unfortunately, I've found myself displeased with one specific feature: the DPad. It takes a great deal of force to move diagonally in any game I play. I truthfully don't recall this being an issue with my old OEM unit that I enjoyed in highschool. I added some cardstock as a makeshift spacer based on some recommendations I've found online, and that improved it only marginally.

Has anyone else out there encountered this issue? If so, do you have any advice?

My initial research suggests the aftermarket membrane for the DPad is the culprit. I've cleaned the contacts on the motherboard so I believe that can't be the problem. If membrane conductivity is the issue, then I don't know what brand to replace it with. Seems like every thing on the market is built by the same manufacturers?

Any advice you guys can offer would be appreciated!

top 4 comments

sorted by: hot top controversial new old

[–] [email protected] 1 points 3 months ago

I had this problem with one I modded myself because the new screen was just slightly thicker than the old, pressing on the outer shell and causing the dpad to need more pressure. The solution that worked for me is cutting a small ring of cardstock and putting it between the dpad and the membrane. It increases sensitivity by a lot, but does come with the side effect that you'll be able to press every direction down at once if you press on the center.

[–] [email protected] 1 points 3 months ago (1 children)

So I had this problem on my modded GBA, my solution was to ever so slightly loosen the screws on the dpad side of the shell. Turned out I was over tightening them

[–] [email protected] 1 points 3 months ago

Thanks for the advice. I gave that a try and it seems to have helped a little. Maybe I just need to grow a stronger thumb lol.

[–] [email protected] 0 points 3 months ago

Could it be membrane firmness is the issue, and not necessarily conductivity?